![]() |
|||||||||||
|
|
|||||||||||
|
FAB Fox single channel The Fox is a special, small, full featured and low noise amp * Two separately voiced inputs. Choose from; Mesender, Splexi, the new (2006) Lowatt (brill and/or normal), or the Matchmore Chief (brill and/or normal) voicings. - or - * Both a High and Low Gain input followed by the Metalhead preamp.
Stock versions include one full Fab tone stack (Gain, Bass, Mid, Sweep, Treble, Top and Master), Stand-by switch for longer tube life, Solid State power supply with built in Fab Sag Circuit, DC heaters on the preamp, Impedance selector switch(your choice, 4/8 or 8/16)), and a Power Cut switch (Pentode/Triode). Combos come with an extension speaker output and a 10" Weber Signature Series speaker. All models also include your choice of one free extra option. Choose from Headphone out(2channel mono), Slave out(guitar amp level), Line out(Mixer level), or a Poweramp input. Output options are derived after the power stage in order to retain both power tube and preamp tone. All models are designed to operate safely without a speaker. Output safety feature engages automatically when speaker is not connected on heads or is engaged with a speaker cut switch on combo models. Possible extra options are available for a small fee on the options page. Output options are all single ended true class A. Choose either 6V6/EL84 for 5 watts pentode/2 watts triode or 6L6 for 8 watts pentode/3.5 watts triode. Assembled chassis with laser cut faceplate (new 2006) and tubes, $450 Cabinet options are:
Close knit Point to Point wiring for low noise and hum
New (2006) female AC connector:
|
|||||||||||
|
|
|||||||||||